Sony BVE-700A, Руководство по установке

Страница: 11 / 18

1-7 (E)
BVE-700A
OPEN
1
2 3 4 5 6 7 8
Factory setting
( indicates the knob position.)
Side A (component side)
S900 S901
D900-D915
A
B
F
G
H
1 2 3 4 5 6 7 8 9 10 11
D930-D937
D1000, D1001
D1502, D1500
D940-D942
D1702 D1700
1-6. Function of Switch and LED on Board
CA-67 board
Switches
n
Do not change the setting of the “Factory use” switches.
Ref. No. Address Name Function
S900 (H-7) Mode select Sets the operation mode when starting up.
switch (1) S900-1 : Sets the operation mode.
OPEN : Normal mode
CLOSE : Installation mode
S900-2 : Sets the operation mode.
OPEN : Normal mode
CLOSE : Diagnostic mode
S900-3 : Factory use
S900-4 : Factory use
S900-5 : Factory use
S900-6 : Factory use
S900-7 : Factory use
S900-8 : Factory use
S901 (H-6) Mode select Sets the operation mode.
switch (2) S901-1 to S901-5 : Sets the Video Format.
Video Format S901
-1 -2 -3 -4 -5
1125/59.94 OFF OFF OFF OFF OFF
1125/29.97 PsF OFF OFF OFF OFF ON
525/59.94 OFF OFF OFF ON OFF
1125/50 OFF ON ON OFF OFF
1125/25 PsF OFF ON ON OFF ON
625/50 OFF ON ON ON OFF
1125/24 PsF ON OFF ON OFF ON
1125/23.98 PsF ON OFF OFF OFF ON
OFF : OPEN
ON : CLOSE (Push the switch to the DOWN position)
Any switch setup other than the these shown on
the above table is invalid.
S901-6 : Factory use
S901-7 : Setup status
OPEN : Normal operation
CLOSE : The machine starts up with the setup of USER SETUP DATA1 state.
OPEN
1
2 3 4 5 6 7 8
Factory setting
( indicates the knob position.)
m
.
Reference inputs B.B and Try Sync
are detected automatically.
. For 1125/59.94 and 1125/50, Ref
Lock is applied to both B.B and Try
Sync reference inputs.
. The BKE-701A switcher board does
not support the SD format.