background image

7

 GB

KLV-32/22T550A

4-153-893-

E1

(1)

Safety information

Installation/Set-up

Install and use the TV set in accordance with 
the instructions below in order to avoid any 
risk of fire, electrical shock or damage and/or 
injuries.

Installation

• The TV set should be installed near an 

easily accessible AC power outlet.

• Place the TV set on a stable, level surface 

to avoid it from falling down and cause 
personal injury or damage to the TV.

• Only qualified service personnel should 

carry out wall installations.

• For safety reasons, it is strongly 

recommended that you use Sony 
accessories, including:
– KLV-32T550A:

Wall-mount bracket SU-WL500 or 
SU-WL50B

– KLV-22T550A:

Wall-mount bracket SU-WL100

• Be sure to use the screws supplied with 

the Wall-mount bracket when attaching 
the mounting hooks to the TV set. The 
supplied screws are designed so that they 
are 8 mm to 12 mm in length when 
measured from the attaching surface of 
the mounting hook.
The diameter and length of the screws 
differ depending on the Wall-mount 
bracket model.
Use of screws other than those supplied 
may result in internal damage to the TV 
set or cause it to fall, etc.

Transporting

• Before transporting the TV set, 

disconnect all cables.

• Two or more people are needed to 

transport a large TV set.

• When transporting the TV set by hand, 

hold it as shown below. Do not put stress 
on the LCD panel.

• When lifting or moving the TV set, hold it 

firmly from the bottom.

• When transporting the TV set, do not 

subject it to jolts or excessive vibration.

• When transporting the TV set for repairs 

or when moving, pack it using the original 
carton and packing material.

Ventilation

• Never cover the ventilation holes or insert 

anything in the cabinet.

• Leave space around the TV set as shown 

below.

• It is strongly recommended that you use a 

Sony wall-mount bracket in order to 
provide adequate air-circulation.

Installed on the wall

Installed with stand

• To ensure proper ventilation and prevent 

the collection of dirt or dust:
– Do not lay the TV set flat, install 

upside down, backwards, or sideways.

– Do not place the TV set on a shelf, rug, 

bed or in a closet.

– Do not cover the TV set with a cloth, 

such as curtains, or items such as 
newspapers, etc.

– Do not install the TV set as shown 

below.

AC power cord

Handle the AC power cord and outlet as 
follows in order to avoid any risk of fire, 
electrical shock or damage and/or injuries:
– Use only Sony supplied AC power cords, 

not those of other brands.

– Insert the plug fully into the AC power 

outlet.

– Operate the TV set on a 110-240 V AC 

supply only.

– When wiring cables, be sure to unplug the 

AC power cord for your safety and take 
care not to catch your feet on the cables.

– Disconnect the AC power cord from the 

AC power outlet before working on or 
moving the TV set.

– Keep the AC power cord away from heat 

sources.

– Unplug the AC power plug and clean it 

regularly. If the plug is covered with dust 
and it picks up moisture, its insulation 
may deteriorate, which could result in a 
fire. 

Notes

• Do not use the supplied AC power cord on 

any other equipment.

• Do not pinch, bend, or twist the AC power 

cord excessively. The core conductors 
may be exposed or broken.

• Do not modify the AC power cord.
• Do not put anything heavy on the AC 

power cord.

• Do not pull on the AC power cord itself 

when disconnecting the AC power cord.

• Do not connect too many appliances to 

the same AC power outlet.

• Do not use a poor fitting AC power outlet.

Prohibited Usage

Do not install/use the TV set in locations, 
environments or situations such as those 
listed below, or the TV set may malfunction 
and cause a fire, electrical shock, damage 
and/or injuries.

Location:

Outdoors (in direct sunlight), at the seashore, 
on a ship or other vessel, inside a vehicle, in 
medical institutions, unstable locations, near 
water, rain, moisture or smoke.

Environment:

Places that are hot, humid, or excessively 
dusty; where insects may enter; where it 
might be exposed to mechanical vibration, 
near flammable objects (candles, etc). The 
TV set shall not be exposed to dripping or 
splashing and no objects filled with liquids, 
such as vases, shall be placed on the TV.

Situation:

Do not use when your hands are wet, with the 
cabinet removed, or with attachments not 
recommended by the manufacturer. 
Disconnect the TV set from AC power outlet 
and antenna during lightning storms.

Screw (supplied with the 
Wall-mount bracket)

Mounting Hook
Hook attachment on rear of 
TV set

8mm - 12mm

KLV-22T550A

KLV-32T550A

30 cm

10 cm

10 cm

10 cm

Leave at least this space around 
the set.

30 cm

10 cm

10 cm

6 cm

Leave at least this space around the 
set.

Air circulation is blocked.

Wall

Wall

Continued

Содержание Bravia KLV-22T550A




























Отзывы: