Exploring Fun Features
> BRAVIA Sync with Control for HDMI
BRAVIA Sync with Control for HDMI
The BRAVIA Sync function allows this TV to communicate with other Sony equipment supporting the Control for
HDMI function.
To connect Sony equipment with Control for HDMI
Use an HDMI cable that bears the HDMI logo for connection. Line up the triangle on the head of the HDMI cable
with the triangle on the label of the HDMI input when connecting the HDMI cable.
Setting the Control for HDMI
The Control for HDMI function must be set up in order for the TV to communicate with other Control for HDMI
enabled equipment. To setup the TV’s Control for HDMI:
To verify connected devices, select Device List from the HDMI Settings menu. For other equipment, refer to its
operating instructions.
Available options using Control for HDMI
The following operations are available after you connect the supported Sony equipment with Control for HDMI
function to your TV:
z
Automatically turn off the connected equipment when you turn off the TV.
z
The connected equipment and TV are turned on by One-Touch-Play.
z
Possible operations with SYNC MENU buttons.
When a Sony A/V receiver with BRAVIA Sync is connected, the following additional operations are possible:
z
Turning on the A/V receiver when the TV is turned on.
z
Automatically switching to the audio output of the A/V receiver’s attached speakers.
z
Adjusting the volume and muting of the A/V receiver with the TV’s remote control.
1) Select Channels & Inputs on the Settings menu.
2) Highlight HDMI Settings and press
3) Select Control for HDMI and set it to On.
Back to Internet Widgets (Page 9 of 9)
Next to Favorites
Home | Getting Started | Operating the TV | Exploring Fun Features | TV Home Menu | Other Information | Specifications
Tell us your opinion about this online reference book.
Copyright © 2009 Sony Electronics Inc. All rights reserved.
Getting Started
Operating the TV
Exploring Fun Features
TV Home Menu
Other Information
Specifications
