Sony Bravia KDL-40W600B, Руководство по обслуживанию

Страница: 9 / 47

RB2G
CHASSIS
W580B/W585B/W590B/W600B/W605B/W607B/W608B/WM15B
9
Self Diagnostic Function
2-4. Standby LED Error Display
2-2. LED Display Control
Example: The figure above shows LED display when SHUTDOWN is caused by Audio
Error. It repeats flashing for a specified number of times in 0.5sec/cycle and has a 3 seconds
interval of lighting off. Please note that a 3 seconds interval of lighting off is fixed regardless of abnormal state types.
When safety shutdown occurs, Standby LED display reports the cause by using the lightning
patterns as indicated below
.
2-3. LED Pattern
3.0sec 3.0sec
0.5sec
0.5sec
RED LED
blinking count
Detection Items Board Error Item
2x
Main 12V failure [MAIN_POW E]
* This failure is not saved

G** Board Error

BAX_L Board Error
3x
Main 5.0/3.3/1.8/1.0/ 1.1V failure [DC_ALERT]
* 5.0/1.0V failures are not saved.

BAX_L Board Error
Audio amp. protection [AUD_ERR]

BAX_L Board Error

Speaker
HDMI equalizer/switch I2C NACK [HDMI_EQ] * There is Temp.
sensor on the same I2C bus.

BAX_L Board Error
Tuner or demodulator I2C NACK [TU_DEMOD]

BAX_L Board Error

Tuner Board Error
AFE device I2C NACK [AFE_I2C]

BAX_L Board Error

Tuner Board Error
AFE device error SPI NACK [AFE_SPI] * only for AEP,CH

BAX_L Board Error

Tuner Board Error
4x
LED driver failure [LD_ERR]

LED Driver (LD) Board Error

Panel module
LED voltage error [VLED]]

LED Driver (LD) Board Error

Panel module
5x
Panel ID EEPROM I2C NACK (Also panel power failure is a
suspect) [P_ID_ERR]

Panel module

Tcon board

G** Board Error

BAX_L Board Error
6x
Backlight failure [BACKLIGHT]

Panel module

G** Board Error

BAX_L Board Error
Backlight converter OVP [BACKLIGHT]

Panel module

Tcon board

G** Board Error

BAX_L Board Error
7x
Over temperature protection [TEMP_ERR]
Temp. sensor I2C NACK [TEMP_ERR] * There is HDMI Eq on the
same I2C bus.

BAX_L Board Error
8x
Software Error (Also the main board’s memory or CAM module is a
suspect)

BAX_L Board Error
9x Tuner Board Error [TU_BOARD]

Tuner Board Error
Size G** Board Type
Tuner Board
America/Pan Asia/China/Europe Japan
40” Not applicable TUS TUW
48” Not applicable TUS TUW
Status
White Center
LED
(applicable for
HSC2 only)
Side RGB LED
Side Amber
LED
Remarks
Power Off
( by power saving switch off and *1)
- Off Off
*1 power switch off (by side
key)
Power On - Green Lit Off
STBY/i.LINK STBY/PC STBY
( by remote control off only )
- Off Off
Skype Call Receive - White one shot Off
Picture Off - White one shot Off
Device Connection - Cyan one shot Off
Power ON Animation - White one shot Off
Sleep Timer/On
Timer/Reminder/REC Timer/Photo
Frame
( Power On )
-
Amber
Lit*2, *6
Off
*2 One Shot is only user action.
*6 The actual data behaviour is
“One Shot->Lit” to solve issue
related to LED priority.
On Timer/Reminder/REC Timer
( Deep Standby )
- Off Amber
After 5 minutes, side amber
LED On
Failure -
Red
Blinking
Off
The number of LED blinking
indicates cause of failure
( refer to Led Error / Triage
chart)
Aging mode - Green Blinking Off Blinking:0.5sec On / 0.5sec Off
End of Aging mode - Green Blinking Off Blinking:3sec On / 3sec Off
Software Updating - white blinking off
Software Updating finish - Blue lit off
Test Reset - white blinking
Amber
blinking
Error of panel ID - Green Blinking
Amber
Blinking
Blinking:0.5sec On / 0.5sec Off
REC (SCART REC & HDD
REC/LIVE PAUSE) [AEP/J only]
-
Red(Pink)
Lit*2, *6
Off
*2 One Shot is only user action.
*6 The actual data behaviour is
“One Shot->Lit” to solve issue
related to LED priority.
ePOP/
Shop Illumination
- Cyan loop Off
One shot Center White when
feature change.