RB2G
CHASSIS
W580B/W585B/W590B/W600B/W605B/W607B/W608B/WM15B
Service Adjustment
Save Changing Data by Service Mode 2
1.
In
“Digital”
service mode ( “002 MODEL” category)
001 SEG Select segment information
002 DEST Select destination information
003 MODELNAME Select Model Name
004 SERIAL Can be set Only Once for the new board
005 SHIP_CONFIRM...Can set correct Product Code
006 VAR_TYPE Select variable information
a.
Change data for each model. (Refer to 4-4 Part B)
b.
Press “Mute”, “0” on remote sequentially. Red “
WRITE
” is
shown. This indicates writing is in process.
c.
After a while, red “
WRITE
” disappears. Green
Done
will be
displayed
for a while, which means writing process is done.
d.
For the items SEG, DEST, MODELNAME after changing
each item, service save (“mute”+”0”) is required. For the
item SERIAL, after inputting the serial number, press key
“12” or “Enter” to save the data.
–
Please save the items according to the sequence “SEG ->
DEST -> MODELNAME-> VAR_TYPE”
–
When Saving the item "SEG", sometimes instead of
"Writing", the word "Pending" will appear. In this case, skip
"SEG", saving "DEST“ , "MODELNAME“ and “VAR_TYPE”
is OK.
DIGITAL Service menu
Only when B* board is replaced.
Remote Commander
a
a
a
b
b
4-5. Restore WB / Gamma Adj. Data to B board.
1.in
“VPC”
service mode
a.Select “000 DATA_COPY” category by pressing “2 / 5” on remote.
b.Change data from “0” to “1” by pressing “3 / 6” on remote.
c.Wait until data is changed from 1 to 3.
d.When data is changed from 1 to 3, restoring process is finished.
e.In case data is changed from 1 to 2, keep default setting. (No
more process is needed.)
HE,HS Models
Remote Commander
a
b
End restore process
VPC
SERVICE
000
DATA_COPY
000
BU_TRANS
3
DATA TRANSFER SUCCESS
Restore process
VPC
SERVICE
000
DATA_COPY
000
BU_TRANS
1
DO NOT POWER OFF
DO NOT TOUCH ANY KEY NOW
Please apply after USB-DL when B board is replaced.
31
DIGITAL
SERVICE
002 MODEL
001 SEG
HE_BASE
Write
VIDEO:STANDARD AUDIO:STANDARD
PSAVE:STANDARD
MAIN: SUB:
TUNER/----/---- ----/----/NTSCU
----X----/----- ----X----/-----
-----/--- -----/---