F:\Worker\SONY WAX3 D-series EN
121\3212313121(052907)\050GET.fm
masterpage:Left
20
KDL-32XBR4/KDL-40D3000
This TV is equipped with BRAVIA Threatre Sync.
The
HDMI Control
function enables BRAVIA
Theatre Sync to allow communication between
Sony TV’s and Sony equipment. Only Sony
equipment with HDMI Control capability is
supported.
To connect HDMI Control equipment
Use an HDMI cable that bears the HDMI logo for
connection. See pages 16 to 19 or see the HDMI
connection shown in the Quick Setup Guide
provided with the TV documentation.
Setting the HDMI Control
In order for the
HDMI Control
function to
operate, the TV and other Sony
HDMI Control
equipment must be setup. See page 39 on how to
turn the
HDMI Control On
. For other equipment,
refer to the operating instruction for that
equipment.
HDMI Control available with your TV
Once the supported equipment is connected, the
following operations are available:
•
Turn off the equipment automatically
when you turn off the TV.
•
When the connected equipment is turned
on by One-Touch-Play, the TV will
automatically turn on and select the
respective HDMI input.
•
Automatically turn on equipment listed
under the
External Inputs
on the
XMB
™
(XrossMediaBar) when selected, see pages
9 and 28.
When a Sony A/V receiver with BRAVIA Theatre
Sync is connected, the following additional
operations are possible:
•
Turning on the A/V receiver when the TV
is turned on.
•
Automatically switching to the audio
output of the A/V receiver’s attached
speakers.
•
Adjusting the volume and muting of the A/V
receiver with the TV’s remote control.
~
• The A/V receiver cannot be selected from the
XMB
™
.
You can bundle the connecting cables as illustrated
below.
~
• Do not bundle the AC power cord with other
connecting cables.
• The cable holder can be attached in either direction.
Using HDMI Control for BRAVIA
Theatre Sync™
Bundling the Connecting Cables
1
2
