Sony BKM-B10, Руководство по обслуживанию

Страница: 53 / 161

3-10
PFM-42B1, PFM-42B1E
(14)INTERLACE MODE
Whether the input signal is interlaced or not is set.
ON : When the input signal is the interlaced signal.
OFF : When the input signal is not the interlaced
signal.
(15)FIELD MODE
Whether the interlaced signal is processed within a
field or within a frame, is set.
ON : When the input interlaced signal is processed
within a field.
OFF : When the interlaced signal is processed within
a frame.
Select the ON position when a signal has a low co-
relationship between the two fields within a frame
such as moving picture.
(16)FRAMELOCK MODE
Whether the PDP display picture is synchronized with
the input signal to scan converter or not, is set.
ON : The PDP display picture is synchronized with
the input signal.
OFF : The PDP display picture is asynchronous with
the input signal.
When moving picture (animation) is going be dis-
played, select the ON position.
Note : This item can be set to ON as long as the vertical frequency of the
input signal is in the range of 50 to 60 Hz.
(17)MATRIX SELECT
The color difference matrix when the YUV signal is
being input, is set.
(18)PICTURE AGC
Whether the PICTURE AGC is turned ON or OFF is
set.
Result of this setting becomes the initial value of the
user menu PICTURE AGC.
This function becomes valid only when the COMPOS-
ITE/YC/YUV signal is being received.
(19)ASPECT
The desired aspect ratio is selected from the aspect
ratios of 4
x 3 or 16 x 9 or W ZOOM or LB ZOOM.
Result of this setting becomes the initial value of the
user menu ASPECT.
Note : The W ZOOM, can not be selected when the ZOOM is in the range of
x 2 to x 4.
(20)ZOOM
The desired zoom ratio is selected from the zoom
ratios of
x
1 or
x
2 or
x
3 or
x
4. Result of this
setting becomes the initial value of the user menu
ZOOM.
Note : Any zoom ratios other than x 1 cannot be selected when the
ASPECT is W ZOOM, LB ZOOM.
(21)APERTURE INIT
The desired aperture is selected from HIGH or MID or
LOW. Result of this setting becomes the initial value
of the user menu APERTURE.
(22)APERTURE HIGH
The scaling filter value when selecting HIGH of the
APERTURE, is set. The scaling filter value can be set
in the range of 000 to 011. (Refer to the Supplement
to APERTURE in the following paragraph.)
(23)APERTURE MID
The scaling filter value when selecting MID of the
APERTURE, is set. The scaling filter value can be set
in the range of 000 to 011. (Refer to the Supplement
to APERTURE in the following paragraph.)
(24)APERTURE LOW
The scaling filter value when selecting LOW of the
APERTURE, is set. The scaling filter value can be set
in the range of 000 to 011. (Refer to the Supplement
to APERTURE in the following paragraph.)
< Supplement to APERTURE >
The PFM-42B1/B1E has the 12 different types of built-in
scaling filter. Select an appropriate filter using the follow-
ing filter characteristics chart as a guideline.
Wide
(Sharp)
Narrow
(Soft)
Frequency
bandwidth
0 1 2 3 4 5 6 7 8 9 10 11
MATRIX SELECT : ITU601
MATRIX SELECT : ITU709