Sony BKM-B10, Руководство по обслуживанию

Страница: 10 / 161

1-2
PFM-42B1, PFM-42B1E
2
(GB)
WARNING
Owner’s Record
The model and serial numbers are located on the rear.
Record the model and serial numbers in the spaces provided
below. Refer to these numbers whenever you call upon your
Sony dealer regarding this product.
Model No. Serial No.
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.
For the customers in the U.S.A.
If you have any questions about this product, you may
call: Sony’s Business Information Center (BIC) at 1-
800-686-SONY (7669)
or Write to: Sony Customer Information Services Center
6900-29 Daniels Parkway, PMB 330 Fort
Myers, Florida 33912
Declaration of Conformity
Trade Name: SONY
Model: PFM-42B1
Responsible Party: Sony Electronics Inc.
Address: 1 Sony Drive, Park Ridge,
NJ 07656 U.S.A.
Telephone Number: 201-930-6972
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.
For the customers in Canada
This class B digital apparatus complies with Canadian
ICES-003.
For PFM-42B1E users
THIS APPARATUS MUST BE EARTHED
IMPORTANT
The wires in this mains lead are coloured in accordance with
the following code:
Green-and-yellow
: Earth
Blue : Neutral
Brown : Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
identifying the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be
connected to the terminal in the plug which is marked with
the letter E or by the safety earth symbol I or coloured
green or green-and-yellow.
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
Voor de klanten in Nederland
• Dit apparaat bevat een Li-ion batterij voor clock back-up.
• De batterij voor clock back-up is vastgesoldeerd op de B
printplaat BAT500.
• Raadpleeg uw leverancier over de verwijdering van de
batterij op het moment dat u het apparaat bij einde
levensduur afdankt.
• Gooi de batterij niet weg, maar lever hem
in als KCA.
The socket-outlet should be installed near the equipment
and be easily accessible.
NL
3
(GB)
English
GB
Table of Contents
Precautions ............................................................... 5 (GB)
Features ..................................................................... 6 (GB)
Location and Function of Parts and Controls ....... 7 (GB)
Front / Rear / Right Side .......................................... 7 (GB)
1 (standby) Switch / Indicator Section ................... 8 (GB)
Control Button Section (Rear) ................................. 8 (GB)
Connector Panel ....................................................... 9 (GB)
Remote Commander RM-42B ............................... 10 (GB)
Caution .................................................................... 11 (GB)
Connections ............................................................ 12 (GB)
Connecting the AC Power Cord ............................ 12 (GB)
Connection Example .............................................. 12 (GB)
Using On-screen Menus ........................................ 14 (GB)
Operating Through Menus ..................................... 14 (GB)
Menu Guide ........................................................... 14 (GB)
Watching the Picture .............................................. 18 (GB)
Switching the Input Signal ..................................... 18 (GB)
Switching the Display Mode .................................. 19 (GB)
Input Signal and Monitor Status
Information Display .......................................... 20 (GB)
Adjusting the Picture ............................................. 22 (GB)
Adjusting the Contrast, Brightness, Chroma,
and Phase, etc. ................................................... 22 (GB)
Restoring the PIC CONTROL Menu Items to Their
Original Settings ............................................... 23 (GB)
Resizing and Positioning the Picture ................... 24 (GB)
Resizing the Picture ............................................... 24 (GB)
Adjusting the Picture Position ............................... 25 (GB)
Restoring the Original Picture Size and Position ... 25 (GB)
Changing the Aspect Ratio .................................... 26 (GB)
Adjusting the Linearities ........................................ 26 (GB)
Adjusting the Pixels ............................................... 27 (GB)
Using the Memory Function .................................. 28 (GB)
Storing the Current Setting .................................... 28 (GB)
Calling Up a Stored Setting ................................... 29 (GB)
Selecting the On-screen Language ...................... 30 (GB)