Sony BKDM-3020, Руководство по обслуживанию

Страница: 24 / 78

1-16 (E)
S801-6 through S801-8(H-1) :
Physical channel setting switch
Sets the physical channel (*3) .
Physical channel S801-6 S801-7 S801-8
CH1 OFF OFF OFF
CH2 OFF OFF ON
CH3 OFF ON OFF
CH4 OFF ON ON
CH5 ON OFF OFF
CH6 ON OFF ON
CH7 ON ON OFF
CH8 ON ON ON
S801-6 through S801-8 are set to OFF at the factory.
(*3) : The physical channel is the number assigned to each
processor so that the control panel can discriminate
multiple processors.
COR407(A-6) through COR412(B-6) : Factory use
These switches are used for the adjustment in the factory.
n
Be sure to use these switches for factory setting (USE).
[LED]
D2 (Green)(E-1) : RUN indicator
Lights during the CPU operation.
D3 (Green)(E-1) : VD indicator
Indicates the existence of VD signal.
Lights when VD signal is normally input to the board.
D802(F-1) through D810(G-1) : Factory use
These LEDs are used for the adjustment in the factory.
D819(E-1) through D822(F-1) : Factory use
These LEDs are used for the adjustment in the factory.
MPU-70 board
[Switch]
S3(J-4) : Emulator mode setting switch
n
Be sure to use this switch for setting at the factory.
Factory setting:
S3-1 S3-2 S3-3 S3-4 S3-5 S3-6 S3-7 S3-8
OFF OFF OFF OFF OFF OFF OFF ON
S201(F-1) : Reset switch
Resets the CPU on the MPU-70 board.
[LED]
D202 (Green)(G-1) : FD indicator
Blinks whenever CPU interrupt processing is executed in
each field.
D203 (Green)(G-1) : RUN indicator
Lights during the CPU operation.
D202
D203
S201
A side (Component side)
S3
K J H F E D C B A
4
3
2
1
G
1-8. Switch Settings on Boards and LEDs Description