Sony BKDM-3020, Руководство по обслуживанию

Страница: 22 / 78

1-14 (E)
1-8. Switch Settings on Boards and
LEDs Description
1-8-1. DME-3000/7000
n
The addresses on the boards are shown by ( ) marks.
CPU-114 board (DME-3000 only)
(*1) : DME-3000 (serial number 10001 through 10210)
only
[Switch]
S1(G-1) : Reset switch
Resets the CPU on the CPU-114 board.
S2(H-1) : Interrupt switch
Executes the interrupt processing so as to receive the
communication data from an RS-232C port.
n
Do not press this switch in normal times.
S301-1(D-16 (
*
1) /J-1) : Memory clear switch
ON: Erases the key frame data when the power
is turned on.
OFF: Backs up the key frame data.
Factory setting: OFF
S301-2(D-16 (
*
1) /J-1) : Editor protocol selector
Selects the protocol of the D-sub Editor connector on the
rear panel.
ON: VTR protocol
OFF: DME protocol
(BVE-9000/9100 + BKE-9009)
Factory setting: OFF
When the software V1.40 or later is installed:
Editor protocol can be set by the setup menu (702 OPERA-
TION).
Mode
POWER ON mode
Factory set User define
When power Switch setting Menu setting
is turned on takes effect. takes effect.
When protocol Menu setting Menu setting
is reset by takes effect. takes effect.
setup menu
S301-3, 4(D-16
(
*
1)
/J-1):
The functions of these switches depend on installed
operating software’s version.
S301-3 and S301-4 are set to OFF at the factory.
When the software V1.00 is installed: AUX protocol
selector
Selects the protocol of the D-sub AUX connector on the
rear panel.
S301-3 S301-4 Selected protocol
OFF OFF CART protocol
(DVS-V1201, BKDM-5080)
ON OFF SWITCHER protocol
(DVS-8000/6000/2000 series)
ON ON Not used.
When the software V1.11 or later is installed: Factory use
These switches are used for the adjustment in the factory.
AUX protocol can be set by the setup menu (711 SOURCE
SELECTOR).
n
Be sure to set S301-4 to OFF.
1-8. Switch Settings on Boards and LEDs Description
B C A D N E K L M
F G H J
1
2
3
18
17
16
15
S301( * 1)
ND301
S1
S2
S301
A side (Component side)