Sony BDX-M1000, Руководство по установке

Страница: 7 / 36

1-1 (E)
BDX-M1000
Section 1
Installation
1-1. Installation Environment
Operating temperature : 5 d C to 40 d C
Storage temperature :
_
20
d
C to
+
60
d
C
Operating humidity : 20
%
to 90
%
(non-condensing)
Do not install the BDX-M1000 in the following locations:
.
Areas where the unit will be exposed to direct sun light
or any other strong lights.
. Areas near heat sources.
.
Dusty areas or areas where it is subject to vibration.
.
Areas with strong electric or magnetic fields.
.
Areas where is subjected to electricity noise.
. Areas where is subjected to static electricity noise.
To prevent the temperature rise inside the BDX-M1000,
pay careful attention to circulation of air in the place where
the BDX-M1000 is installed.
The rear side of the BDX-M1000 should be at least 20 cm
(8 inches) away from walls for ventilation and
maintenance.
c
Do not block the ventilation holes.
If the ventilation holes are blocked, overheating inside the
unit may cause fire.
1-2. Power Supply
1-2-1. Power Specifications
Power requirements : AC 100 to 240 V
50/60 Hz
Current consumption : maximum 2.0 A (at 100 V)
maximum 1.0 A (at 240 V)
A switching regulator is used for the power supply of the
BDX-M1000. The voltage within the range of 100 V to
240 V can be used without changing the supply voltage.
n
As the inrush current at turn-on is maximum 20 A (at
100 V)/maximum 40 A (at 240 V), the capacity of the AC
power must be adequate with the inrush current of maxi-
mum 20 A (at 100 V)/maximum 40 A (at 240 V).
If the capacity of the AC power is not the adequately large,
the breaker of the AC power at the supply side will operate
or the BDX-M1000 will abnormal operate.
1-2-2. Power Cord
w
To avoid a fire or an electric shock, be sure to use the
designated power cord. And do not damage to the power
cord.
n
For the customer outside of the area as shown above or in a
part of Europe, the above-mentioned power cords can not
be used.
Use the power cord that is applicable to the places in the
world.
1 2
2
2
Power cord for the customer in the U.S.A. and Canada.
1
Power cord set ! 1-557-377-11
2
Plug holder (Black) 2-990-242-01
Power cord for the customer in the United Kingdom.
1
DK-2401 (UK) (approx. 2.4 m)
2
Plug holder (Black) 2-990-242-01
Plug holder is included in DK-2401 (UK).
Power cord for the customer in Europe except the
United Kingdom.
1
DK-2401 (AE) (approx. 2.4 m)
2
Plug holder (Brown) 3-613-640-01
Plug holder is included in DK-2401 (AE).
AC inlet
AC inlet
1
AC inlet
1