![background image](http://html.mh-extra.com/html/sony/bdkp-e1002/bdkp-e1002_installation-manual_411058011.webp)
1-3 (E)
BDX-E1000
1-4. Rack Mounting
Required parts
• Rack mount rail (RMM-30)
Rail with bracket
: 2 pcs.
Screw (B5
X
8)
: 8 pcs.
• Screw for inner rail (B4
X
8)*
: 6 pcs.
• Screw for rack mounting (RK5
X
16) : 4 pcs.
• Washer for rack mounting
: 4 pcs.
(Sony part number: 2-297-913-01)
* : The BDX-E1000 comes with the eight screws. The
two screws of them are spare.
c
Be sure to use the RMM-30 rack mount rail.
If a rack mount rail other than the RMM-30 is used, the
BDX-E1000 may be dropped by insufficient strength of
the rack mount rail. This may cause a injury.
Procedures
1.
Turn the power off.
2.
Remove the four feet from the bottom of the BDX-
E1000.
Feet
BVTT 3
·
12
Feet
BVTT 3
·
12
3.
While pressing the stopper of the rail, pull out the
inner rail.
4.
Attach the inner rails to the BDX-E1000 using the six
screws (B4
X
8) supplied with the BDX-E1000.
5.
Loosen the screws fastening the rear bracket to the
outer rail, and adjust the position of the rear bracket
with the rack depth.
Rear bracket
Front bracket
Outer rail
Stopper
Inner rail
Outer rail
Inner rail
Inner rail
B 4
×
8
B 4
×
8