Sony BC-M50, Руководство по обслуживанию

Страница: 19 / 30

2-3 (E)
BC-M50
Case R
Main board
Connecter (CN204)
Connecter
(CN201)
AC SW assembly
Power switch guard
LED board
BTP 3 x 12
PSW
3 x 6
K 3
x
8
BTP 3 x 8
a
Harnesses
Harness
Connecter
(CN203)
a
Connecter
(CN101)
P 3 x 4
Handle block
PSW 3 x 8
Stand assembly
Clamper
Shaft
2-4. Removing the Boards
1. Remove the handle block.
2. Remove the clamper from the shaft of the stand assembly.
3. Remove the two screws (PSW 3
x
8), then remove the stand assembly by pulling it in the direction
indicated by the arrow.
4. Remove one screw (K 3
x
8).
5. Disconnect the harnesses from the four connectors (CN101, 201, 203, 204) on the Main board.
6. Remove one screw (PSW 3
x
6) and three screws (BTP 3
x
12), then remove the Main board.
7. Remove the power SW guard.
8. Remove one screw (BTP 3
x
8), then remove the AC SW assembly.
9. Remove one screw (P 3
x
4).
10. Disconnect the harness from the connector (CN401) on the LED board, then remove the LED board.
11. Install the Main board and LED board in the reverse order of steps 1 to 10.