Sony AZ2-F, Руководство по обслуживанию

Страница: 74 / 131

KDL-32EX427/32EX527/40EX527/46EX527 68
SECTION 7 - SERVICE ADJUSTMENTS
ADJUSTING THE VCOM DATA
8. Press
JUMP
to access the VPC Service Menu.
9. Press
2
to move to 002 VCOM category.
10. Press
1
to move to 000 ENABLE item.
VPC SERVICE
002 VCOM
000 ENABLE 0
11. Press
3
to increase the data value from 0 to 1.
12. Press
1
to move to 001 ADJUST item.
VPC SERVICE
002 VCOM
001 ADJUST 64
13. Press
3
or
6
to increase or decrease the data value
until the flickering in the picture is at an acceptable
level.
VERIFYING THE VCOM ADJUSTMENT SETTINGS
14. Press
JUMP
to access the DIGITAL Service Menu.
15. Press
2
to move to 007 VCOM category.
DIGITAL SERVICE
007 VCOM
000 SRV_OSD_EN 1
16. Press
3
to remove the on menu display.
17. Verify that flickering is at an acceptable level.
NOTE: If the picture continues to flickers, repeat steps 8
thru 17 until flickering is acceptable.
COMPLETING THE VCOM ADJUSTMENTS
18. Press
JUMP
to access the VPC Service Menu.
19. Press
2
to move to 002 VCOM category.
20. Press
1
to move to
000 ENABLE
item.
VPC SERVICE
002 VCOM
000 ENABLE 0