background image

KDL-32EX427/32EX527/40EX527/46EX527 12

SECTION 2 - SOFTWARE REQUIREMENTS

OVERVIEW

There are 2 reasons for updating the software on the TVs. 

 

Software updates for customers

 

These updates are for enhancements or improvements that 

have been made to the software after the TV was released. 

 

Software update for servicers

 

These updates are specifically for servicers to use during a 

service call.

SOFTWARE UPDATES FOR CUSTOMERS

The subject of software updates is very important. The televisions 

of today have advanced to the point where they are not simply a 

television anymore. They are evolving into devices that are designed 

to integrate with numerous other devices found in the home. Some 

examples are: Portable audio and video devices, still cameras, home 

computer networks and accessing the internet to name a few.
Communications with these varying devices requires that the 

television be compatible with varying communications protocols. 

Although standards are detailed for each of these protocols, the real 

world dictates that occasional errors may occur that could prevent 

devices from operating or communicating properly.
Keeping the software in the television up-to-date is a procedure that 

is normally handled by the owner of the television. Most customers 

who own computers and other digital devices are familiar with and are 

accustomed to updating the software in their products. If a customer 

contacts the Sony Customer Support Center and it is deemed to 

be correctable with a software update, the issue is handled at the 

customer level.

Содержание AZ2-F




































































































































Отзывы: