Sony Anycast station AWS-G500, Руководство по эксплуатации

Страница: 33 / 316

33
Names and Functions of Parts
C
hap
te
r 1
Ov
er
v
ie
w
These correspond to the PGM selection button, the
NEXT selection button, and the audio channel
fader numbers.
c
Audio source name
This shows the name of the audio signal assigned
to the channel fader (page 71) or the file name on
the external hard disk (page 181).
d
Video source name
In viewers 1 to 6, this shows the name of the video
signal assigned to the selection button (page 67) or
the file name on the external hard disk (page 181).
For the INT viewer, this displays the color matte
and color bars, or the graphics file name selected
in the INT source selection menu.
e
Input signal indication
If the input level of the audio assigned to a channel
fader is -60 dBFS or more, this lights green, and
you can check that there is an audio input.
For stereo you can check left and right channels
separately; for monaural both channels are shown
the same.
f
Peak indication
If the input level of the audio assigned to a channel
fader is -8 dBFS or more, this lights red.
For stereo you can check left and right channels
separately; for monaural both channels are shown
the same.
g
Selection frame
Depending on the selection state, the frame color
changes.
Red: Video selected with PGM selection button
Amber: Video selected with NEXT selection
button
Green: Video selected with NEXT selection
button when the KEY button is lit (video with
a key inserted)
h
Hard disk status
When an external hard disk is connected, this
shows the status of the hard disk, the remaining
recording capacity, and the recording operations.
Recording operation indications
REC PAUSE: Recording on standby
No Signal: Recording is stopped because
there is no video signal input
REC: Recording
: ON LINE recording reservation (press
the ON LINE button to enter a recording start
state)
Unformatted: Error requiring formatting
Disk Full: No disk space left (200 MB or less)
File Number Full: The number of files that can be
recorded has been exceeded
Device Error: It became impossible to recognize
the hard disk during recording
i
Device status
The content displayed differs as follows
depending on the material.
Video from a VISCA-compatible camera
being controlled remotely
Displays the VISCA-compatible camera’s status.
No Response: Communication cannot be
established with the camera.
Initializing: Appears at system startup and during
camera reset.
INT graphics file
Loading: File is loading
When playing a file on the external hard
disk
Displays the status during file operation or VCR
playback.
File operation and VCR playback
indications
No Response: The VCR is not responding
No Cassette: There is no videocassette inside the
VCR
Opening: Opening a file
PLAY: Playback
STOP: Stopped
STILL: During file operation
Hard disk
drive number
Remaining capacity shown by progress bar
Available
recording time
Recording
operations
Play position
Corresponding hard
disk number
Timecode
File operation