Sony Anycast station AWS-G500, Руководство по эксплуатации

Страница: 223 / 316

223
Video/Audio Signal Adjustments and Settings
Chap
te
r 3
O
per
at
ion
s
• Video displayed on the PGM viewer lags several frames behind the video
output from the PGM video output connectors.
6
Press the MENU button, to close the menu.
Adjusting the Output Using the Oscillator Signal
This is for setting the output oscillator signal for use during adjustment.
1
Press the MENU button.
2
In the top menu, select [Audio Utility].
3
Select [OSC], and confirm, and set the oscillator signal output.
Setting the oscillator signal frequency
1
Select [OSC Freq.], and confirm;
2
select the frequency from the
submenu, and confirm.
When the output destination is set with [OSC OUT], and a selection other
than [Off] is made, the DIM button lights, and the levels of the internal
speakers, the headphones, and monitor outputs are automatically reduced.
Setting the oscillator signal output level
1
Select [OUT Level], and confirm;
2
adjust the output level with the
slider.
Setting the oscillator signal output destination
1
Select [OSC OUT], and confirm;
2
select the output destination to
output the oscillator signal, and confirm.
You can select multiple output destination.
4
Press the MENU button to close the menu.
Note
Note
Audio Monitor
OSC
TB
OSC Freq. Off
OUT Level -20dBFS
OSC OUT
Off
B 100Hz
440Hz
1kHz
10kHz
1 2
Audio Monitor
OSC
TB
OSC Freq. Off
OUT Level -20dBFS
OSC OUT
1 2
Audio Monitor
OSC
TB
OSC Freq. Off
OUT Level -20dBFS
OSC OUT
PGM
s AUX1
s AUX2
s MIX
1 2