Sony Anycast station AWS-G500, Руководство по эксплуатации

Страница: 167 / 316

167
Using the FACTORY USE Connector
Chap
te
r 3
O
per
at
ion
s
Using the FACTORY USE Connector
Connecting the FACTORY USE connector on the unit to the tally connector on
a CCU (camera control unit) or other device allows you to use the tally lamps on
the camera and switch between PGM and NEXT selection buttons from an
external device when one is connected.
Using Camera Tallies
When the camera supports the camera tally function (BRC series,
etc.)
The camera tally lamp lights when the input from the camera is being used as
program output.
• Multiple settings are possible for the [Video Input Assign] of the [Control]
setting. In this case, the camera tally lights when the video from any of the
source viewers for which the [Control] setting is made is being used for
program output.
• Tally outputs do not transmit properly when the unit is starting up.
When using CCU, etc.
If the FACTORY USE connector of the unit is connected to the tally connector
of a CCU (camera control unit), the tally lamp lights for any camera that is
assigned to a PGM selection button or NEXT selection button on the front panel,
as long as video from that camera is being used as program output (the button
lights red).
Specifications of the FACTORY USE connector
The specification of each pin is as shown below.
Caution
Pin
Number
I/O
Signal
Name
Description
1 I GPI0 GPI IN1: Switches to the PGM or NEXT selection button
assigned to source number 1.
5V TTL
2 I GPI1 GPI IN2: Switches to the PGM or NEXT selection button
assigned to source number 2.
5V TTL
3 I GPI2 GPI IN3: Switches to the PGM or NEXT selection button
assigned to source number 3.
5V TTL
4 I GPI3 GPI IN4: Switches to the PGM or NEXT selection button
assigned to source number 4.
5V TTL