Using the various functions
[Focus Area): You can select the focusing area. Use this function when it is
difficult to get the proper focus in auto focus mode.
MENU button--+ O (Camera Settings)--+ [Focus Areal--+
Select the desired setting.
C!l
(Wide)
(Zone)
ID]
(Center)
m
(Flexible Spot)
D!D
(Expand Flexible
Spot)
� .. bl .. !DJ ..
EE� [HG
&
(Lock-on AF)
Focuses automa1ically on a subject in all ranges of the image.
Select a zone on the monitor on which to focus. A zone consists
of nine focus areas. and the product automatically selects a focus
area on which to focus.
Focuses automatically on a subject in the center of the image.
Allows you to move the AF range frame to the desired
p
oint on
the screen and focus on an extremely small subject in a narrow
area.
On the Flexible Spot shooting screen, you can change the size of
the AF range finder frame by rotating the control wheel.
If the product fails to focus on the single selected point, it uses
the focus points around the flexible spot as the second priority
area to achieve focus.
When the shutter button is pressed and held halfway down, the
product tracks the subject within the selected autofocus area.
Point the cursor to [Lock-on AF] on the I Focus Area I setting
screen. then select the desired tracking st<.u-t area usin
g
the left/
right sides of the control wheel.
You can move the tracking start area to any desired point b
y
desi
g
nating the area as a nexible spot or an ex
p
anding flexible
spot.
1::9 Silent Shooting
You can shoot images without the shutter sound.
MENU button--+ O (Custom Settings)--+ [1::9 Silent Shooting]
--+
Select the desired setting.
GB
82
Bottom view
[I] Battery insertion slot (49)
[gJ Battery cover (49)
lli] Tripod socket hole
• Use a tri
p
oli with a screw less
than 5.5 mm (7/32 inches) long.
Otherwise, you cannot firmly
secure the camera. and damage
to the camera may occur.
@] Battery cover locking button
[ID Battery cover re lease lever
• When you attach a vertical gri
p
(sold separately), remove the
battery cover.
Identifying parts
CD
"'
----�-@] �
CII
'--�-,;--[ID "'
Connection plate cover
Use this when using an AC-PW20
AC Adaptor (sold separately).
Insert the connection plate into the
battery compartment. and then pass
the cord through the connection
plate cover as shown below.
• Make sure that the cord is not
pinched when you close the
cover.
GB
23