— 5 —
A-700T
4
Adjustments
A number of digital controls are provided to allow you to
optimize the display parameters to your preferences.
You can adjust the picture to your preferences by following
the procedure described below.
You can adjust all items on the OSD (On Screen Display).
POWER
SAVING
Push this part to open the control panel cover.
p
Adjustments will be stored automatically.
p
The OSD automatically disappears 3 seconds after you
release the buttons.
Control Panel
Contrast
The adjustment data becomes the common setting for all
input signals.
1
Press the
>
+/– button.
The
>
OSD (On Screen Display) appears.
2
Press the
>
+/– button to adjust picture contrast.
+ .... for more contrast
– .... for less contrast
Horizontal centering
The adjustment data becomes the unique setting for the
input signal received.
1
Press the
S
∫
/
ı
button.
The
S
OSD (On Screen Display) appears.
2
Press the
S
∫
/
ı
button.
∫
... to move right
ı
... to move left
Brightness
The adjustment data becomes the common setting for all
input signals.
1
Press the
¨
+/– button.
The
¨
OSD (On Screen Display) appears.
2
Press the
¨
+/– button to adjust picture brightness.
+ .... for more brightness
– .... for less brightness
Vertical centering
The adjustment data becomes the unique setting for the
input signal received.
1
Press the
s
◊
/
√
button.
The
s
OSD (On Screen Display) appears.
2
Press the
s
◊
/
√
button.
◊
... to move up
√
... to move down
POWER
SAVING
RESET
3
EN
Installation
•
Prevent internal heat buildup by allowing adequate air
circulation. Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains, draperies) that
may block the ventilation holes.
•
Do not install the unit near heat sources such as radiators
or air ducts, or in a place subject to direct sunlight,
excessive dust, mechanical vibration or shock.
•
Do not place the unit near equipment that generates
magnetism, such as a converter or high-voltage power
lines.
Maintenance
Clean the cabinet, glass panel, and controls with a soft cloth,
lightly moistened with a mild detergent solution. Do not use
any type of abrasive pad, scouring powder, or solvent, such
as alcohol or benzine.
Transportation
When you transport this monitor for repairing or shipping,
use the original carton box and packing materials.
Table of Contents
Precautions ............................................................................... 3
Getting Started ......................................................................... 3
Adjustments .............................................................................. 4
Power Saving Function ........................................................... 6
Plug and Play ........................................................................... 6
Damper Wire .......................................................................... 6
Use of the Tilt-Swivel ............................................................ 7
Specifications .......................................................................... 7
Troubleshooting ..................................................................... 7
Precautions
Warning on Power Connection
•
Use the supplied power cord.
Before using this monitor, make sure that the following
items are included in your package:
the monitor, power cord and this operating instruction
manual.
This monitor will sync to platforms running at horizontal
frequencies between 30 and 70 kHz.
Connecting the Computer
Step 1:
With the computer switched off, attach the video
signal cable to the video output.
Step 2:
Attach the power cord to the monitor and then to
the power outlet.
Step 3:
Turn on the monitor and computer.
Step 4:
If necessary, adjust the user controls according to
your personal preference.
The installation is complete.
Computer
to the video output
Power cord (supplied)
to the power
outlet
Getting Started
for 220 to 240 V AC
for 100 to 120 V AC
For the customers in U.S.A.
If you do not do this, this monitor will not conform to
mandatory FCC standards.
•
Before disconnecting the power cord, wait for at least
30 seconds after turning off the power switch to allow for the
discharging of static electricity on the CRT display surface.
•
After the power has been turned on, the CRT is
demagnetized for approximately 5 seconds. This
generates a strong magnetic field around the bezel, which
may affect the data stored on magnetic tape or disks near
the bezel. Place such magnetic recording equipment and
tapes/disks at a distance from this unit.
The socket-outlet shall be installed near the equipment
and shall be easily accessible.
The instructions given here are partial abstracts from the Operating Instruction
Manual. The page numbers shown reflect those of the Operating Instruction Manual.
SECTION 1
GENERAL