Installation Instruction
,
Electrical
1/000 21-2/FEA 209 544/103 A
©
Sony Ericsson Mobile Communications AB
7(9)
3.2.8
RF Cable
Connect the RF Cable’s (POS-51) N-type connector to the RF port of the Test Instrument (POS-
76).
3.2.9
RF Probe Assembly
Connect the RF Probe Assembly (POS-62) to the RF cable’s (POS-51) SMA type connector.
3.2.10
Battery Eliminator, Jumper cables and Power Supply (optional)
Refer to Section 4 of this document for installation instructions.
NOTE!
It is preferred that a standard fully charged battery be used to power the phone
during the calibration routine. However, a second option is to use the battery
eliminator (dummy battery) with a power supply that meets the requirements
documented in the Electrical Equipment List.
3.2.11
Printer (optional)
Install the printer (POS-109) according to the instructions supplied by the manufacturer.
3.3
Software
3.3.1
SERP Calibration Routines
SERP stands for “
S
ony
E
ricsson
R
epair
P
latform”. It is an application used for testing,
calibrating and repairing Sony Ericsson mobile phones.
4.
Download the latest revision of the SERP application from CSPN
(Repair
Instructions/Standard/SERP Install Package)
or through the use of the SERP Online
Update Tool (OUT).
5.
Unzip the file and open the file “SERP_Installation.doc” for installation instructions.
6.
After SERP is installed a file titled “SERPINFO.htm” will be placed on the Windows
Desktop. This file contains numerous documents including:
•
SERP Users Manual – This document contains system requirements, release notes, fault
reporting instructions, supported test instruments, installation procedures and detailed
operating instructions.
•
SERP Troubleshooting Guide – This document contains a few troubleshooting steps that
should be reviewed before reporting issues to Sony Ericsson.
•
SERP Trouble Report Form – This form should be filled out when reporting SERP issues
to the regional support team.
•
SERP OUT Quick Guide – This document contains system requirements, registration
information and general user guidelines for the OUT application.
