Sony Ericsson T61c, Руководство пользователя

Страница: 57 / 89

Using Voice Control
50
Some menus/features are operator dependent.
No
t f
or
co
m
m
er
cia
l u
se
1 Activate voice dialing using one of these methods:
• Say your Magic Word
• Press and hold a side volume key
• Press and hold the handsfree button
(when using handsfree or Bluetooth)
2 When prompted, say a command, such as “call”.
3 Wait for the beep. Now say the name of the contact
you want to call.
4 The phone will say “Calling Bob”. If there are
multiple numbers for that name, you will be
prompted to say the number type.
Voice Digit Dialing
It is possible to dial a phone number by speaking the
digits with a short pause between each digit. Each digit
already has an associated voice command in English,
but you can rerecord these commands if you wish.
See “Training Commands” on page 46.
1 Activate voice dialing using one of these methods:
• Say your Magic Word.
• Press and hold a side volume key.
• Press and hold the handsfree button
(when using handsfree or Bluetooth).
2 When prompted, say “dial” and the digits for the
number you want to call. The phone will repeat
each number with either a Number Echo or Tone.
3 Say “call” to begin dialing.
Digit Feedback
When you are using Voice Digit Dialing, your phone will
respond to indicate that it understood your command.
Settings include
Number Echo
and
Tone
. Echo feedback
will echo the accepted digit while tone dialing will give
a quick tone to indicate the digit was accepted. Echo is
the default.
Note!
Say “clear” to clear a single digit. If you say clear
two times in a row, you will be asked if you want
to clear the entire number.
Note! Say “verify” to hear all numbers played back
to you.