Sony Ericsson GM28, Руководство интегратора

Страница: 38 / 268

GM28 INTEGRATOR’S MANUAL
38
LZT 123 7468 R1A
4. Safety and Product Care
Please read the information in this section and the information in
“Installation of the Modem”, page 41 before starting your integration
work.
4.1 Safety Instructions
PLEASE READ THESE SAFETY INSTRUCTIONS AND KEEP A
COPY OF THEM.
• Always ensure that use of the modem is permitted. The modem may
present a hazard if used in proximity to personal medical electronic
devices. As a rule, the modem must not be used in hospitals, airports
or planes.
• Never use the modem at a gas station, refuelling point, blasting area
or in any other environment where explosives may be present.
• Operating the modem close to other electronic devices, such as
antennas, television sets, and radios may cause electromagnetic
interference.
• This product is intended to be used with the antenna or other
radiating element at least 20cm away from any part of the human
body. In applications where this rule cannot be applied, the
application designer is responsible for providing the SAR
measurement test report and declaration.
• You are responsible for observing your country's safety standards,
and where applicable, the relevant wiring rules.
4.2 General Precautions
• The GM28 as a stand alone item is designed for indoor use only. To
use outside it must be integrated into a weatherproof enclosure. Do
not exceed the environmental and electrical limits as specified in
“Technical Data”, page 46.
• Avoid exposing the modem to lighted cigarettes, naked flames or to
extreme hot or cold temperature.
• Never try to dismantle the modem yourself. There are no
components inside the modem that can be serviced by the user. If
you attempt to dismantle the modem, you may invalidate the
warranty.
• The GM28 must not be installed or located where the surface
temperature of the plastic case may exceed 85
°
C.
• All cables connected to the GM28 must be secured or clamped,
immediately adjacent to the modem's connectors, to provide strain
relief and to avoid transmitting excessive vibration to the modem in
the installation.