Sony Ericsson GM28 Скачать руководство пользователя страница 224

Страница: 224 / 268

GM28 INTEGRATOR’S MANUAL

224

LZT 123 7468 R1A

Test command returns the list of suported values, and
<prompt_text_length>.

Values follow GSM 11.14 standard.

Note!

If <response_type>=3 (Yes/No), the length of <user_response> is
1 byte. Otherwise, the ME gives an ERROR message.

Unsolicited Result Codes:

*E2STKI: <min_length_response>,<max_length_response>,
<echo_input>,<prompt_coding>,<prompt_text_length>,
<prompt_text>

<answer>

Description

OK.

Performed as required: the text was displayed. It corresponds

to ‘00’ command performed succesfully, described in the GSM

standard

Failed.

User terminated session: the text was displayed as requested

and the user wants to end the proactive session. It corresponds

to ‘10’ proactive session terminated by the user, described in

the GSM standard

Failed.

User requests backward move: the text was displayed as

requested and the user wants to go backwards in the session.

It corresponds to ‘11’ backward move in the proactive SIM

session requested by the user

Failed.

No response from user: the text was displayed, and the user

did not react. It corresponds to ‘12’ No response from user

Failed.

Screen is busy: the text could not be displayed

<response_type>

Description

Response type shall be digits (0-9, *, # and +)

Response type shall be SMS default alphabet

Response type shall be “Yes/No” response

<response_length>

Description

Integer type (0-160)

Value indicating the length of response field

<user_response>. It shall be an integer within the

range between <min_length_response> and

<max_length_response>

<user_response>

Description

String type

Field of length between <min_length_response> and

<max_length_response>, in string type format between

"". Coding is defined in <response_type>.

Содержание GM28













































































































































































































































































Результаты поиска

Содержание GM28

Отзывы:

Похожие инструкции для GM28

Бренды по названию

Популярные бренды

Sony Ericsson GM28, Руководство интегратора

Результаты поиска

Содержание GM28

Отзывы:

Похожие инструкции для GM28

Бренды по названию

Популярные бренды