Sony Ericsson GM28, Руководство интегратора

Страница: 163 / 268

11. NETWORK
163
LZT 123 7468 R1A
11.13 AT+COLP Connected Line Identification Presentation
This command refers to the GSM/UMTS supplementary service COLP
(Connected Line Identification Presentation) that enables a calling
subscriber to get the connected line identity (COL) of the called party
after setting up a mobile originated call. The command enables or
disables the presentation of the COL at the TE. It has no effect on the
execution of the supplementary service COLR in the network.
When enabled (and allowed by the called subscriber), +COLP:
<number>,<type>[,<subaddr>,<satype> [,<alpha>]] intermediate
result code is returned from the TA to the TE before any +CR or V.25ter
responses. It is manufacturer specific if this response is used when
normal voice call is established.
Read command gives the status of <n>, and also triggers an
interrogation of the provision status of the COLP service according
3GPP TS 22.081 (given in <m>).
<service> Description
0 Asynchronous modem
4 Voice
5 Fax
<itc> Description
0 3.1kHz
1 UDI
Description Command Possible Responses
Request connected
line identification
presentation
AT+COLP=[<n>] • OK
• ERROR
Show the current
setting
AT+COLP? • +COLP: <n>,<m>
• OK
• ERROR
Show if the command
is supported
AT+COLP=? • +COLP: (list of
supported <n>s)
• OK
• ERROR