Appendix B - Changing the GC89 Wireless LAN Adapter Properties
107
Appendix B - Changing the GC89 Wireless LAN
Adapter Properties
1. Click the
Start
button.
2. Select
Settings
Control Panel
.
3. Click
System
.
4. Select the
Hardware
tab.
5. Select
Device Manager
Network adapters
802.11g Network Adapter
Advanced
.
To change the value for any of the listed properties, click the property and then change the value in
the
Value
box by either selecting a new value from the drop-down list or by typing in a new value,
as appropriate.
Note:
It is strongly recommended that the values are only changed by network administrators or
technicians with wireless LAN experience.
Item
Useful information
IBSS Channel
Number
Selects the independent basic service set (IBSS) channel number on
which to operate. The GC89 comes preset for use on channels 1-11.
These values are legal in most countries. Some countries allow use on
more channels. If you travel to one of these countries, you may change the
value for IBSS Channel Number to 12 or 13.
Locale
Selects the operating characteristics that comply with the regulations that
apply in a particular country. Before connecting to a wireless network, you
should verify that the Locale value is correct. If you travel to different
countries with your GC89, you should change the Locale value to suit. If
the destination country is not listed, change the Locale value to
Worldwide. Reset the Locale value after returning.
Residents of both Canada and the United States should use the value
USA.
For details of an easier way of changing this value, see
Radio Enable/
Disable
Enables or disables the GC89 wireless LAN radio. This may be necessary
at times to turn off the radio to comply with restrictions prohibiting the
emission of radio signals, such as during take-off and landing onboard a
commercial aircraft.
For details of an easier way of changing this value, see
Rate
Sets the transmission rate. The default value is
Use best rate
. This
automatically adjusts the data rate to the optimal rate based on the
capabilities of the other clients and access points.
Fragmentation
Threshold
The threshold at which the IEEE 802.11 adapter breaks the packet into
multiple frames.
Locally
Administered
MAC Address
This is used to override the MAC address of the GC89 wireless LAN
network adapter.
PLCP Header
This is used to set the header type used for CCK rates. The type can be
long, or auto (short / long).
Содержание GC89 - Ericsson EDGE/Wireless LAN PC Card
Страница 1: ...GC89 Sony Ericsson GC89 User Guide ...
Страница 106: ...106 Appendix A Connection Parameters ...
Страница 113: ...Index 113 Wireless Manager Status screen 51 Working with Phonebooks 75 ...