Sontay RF-LW-HUB, Руководство пользователя

Страница: 22 / 27

Tel: +44 (0)1732 861200 - E - mail: sales@sontay.com - Web: www.sontay.com
© 2017 Sontay Limited. All rights reserved
RF - LW - HUB
IoT LoRaWAN to BACnet IP/Modbus TCP/MQTT Hub
Issue Number 7.0
10/08/2022 Four Elms Road - Edenbridge
Kent - TN8 6AB - UK
22 of 27
BACnet PICS
Normative for the BACnet protocol implementation conformance statement
A B - GW is a BACnet gateway. It is intended for connecting one or more non - BACnet networks into a BACnet internetwork. There are two types
of B - GW devices, those that represent non - BACnet devices as a network of virtual BACnet devices, and those that represent non - BACnet
devices as BACnet objects. Our B - GW implementation falls on the latest category.
Our B - GW enables specification of the following:
• Data Sharing
– Ability to provide the values of any of its BACnet objects
– Ability to allow modification of some or all of its BACnet objects by another device
• Alarm and Event Management
– No requirement
• Scheduling
– No requirement
• Trending
– No requirement
• Device and Network Management
– Ability to respond to queries about its status
– Ability to respond to requests for information about any of its objects
– Ability to respond to communication control messages
– Ability to respond to network layer messages
The rest of this section follows the ANSI/ASHRAE Standard 135 - 2016 Annex A “ PROTOCOL IMPLEMENTATION CONFORMANCE
STATEMENT ” (BPICS) structure. Therefore, a certain degree of BACnet ’ s nomenclatures is required.
Protocol implementation conformance statement
This is our BACnet Implementation Conformance statement. See the ANSI/ASHRAE Standard 135 - 2016 Annex A for more information.
• BACnet Protocol Revision: 12
• Product description:
A BACnet Gateway (B - GW) mapping Wsgateway data input, outputs and values into BACnet objects from a single BACnet device. The Sontay
data are referred as all the properties that a Sontay Hub is able to read or write from different HVAC protocols, such as ModBus, Mbus, LON.
Therefore, our B
- GW lets the Sontay Hub to pass said data into BACnet networks.
• BACnet Standardized Device Profiles Supported (Annex L):
– [X] BACnet Gateway (B - GW)
• BACnet Interoperability Building Blocks Supported (Annex K):
– [X] Data Sharing - ReadProperty - B (DS - RP - B),
– [X] Data Sharing - WriteProperty - B (DS - WP - B),
– [X] Device Management - Dynamic Device Binding - B (DM - DDB - B),
– [X] Device Management - Dynamic Object Binding - B (DM - DOB - B),
– [X] Gateway - Embedded Objects - B (GW - EO - B)
• Standard Object Types Supported:
A deep list of BACnet objects supported is located after this sub - section. However, all the objects are, in terms of BACnet, statically
created. Therefore, the CreateObject and DeleteObject services are not supported.
See Standard BACnet objects types supported for more information.
• Data Link - Layer Options:
– [X] BACnet IP, (Annex J)
• Device Address Binding: NO
• Networking Options: Not applicable
• Character Sets Supported:
– [X] ISO 10646 (UTF - 8)
• Gateway Options:
The non - BACnet devices data are supported by the Wsgateway ’ s box on the form of properties. Each one of those properties will be
represented by a BACnet object.
• Network Security options:
– [X] Non - secure Device - is capable of operating without BACnet Network Security