Sonova Phonak Roger Pen iN, Руководство пользователя

Страница: 21 / 31

40 41
7. Troubleshooting
Problem Causes What to do
I cannot switch Roger Pen iN on The battery is empty Charge Roger Pen iN for at least two hours
I cannot understand the speaker The microphone is not positioned
correctly
Move Roger Pen iN closer to the speaker’s mouth
Make sure Roger Pen iN is pointing towards the speaker’s mouth
The microphone openings are
covered by fingers or clothing
Make sure the microphone openings are not covered by fingers, clothing
or dirt
I cannot hear the speaker’s voice
even though Roger Pen iN is
switched on
The microphone has been muted Check the indicator light – if it is violet, briefly press the on / off button to
activate the microphones
Your hearing aids are not set to
the correct program
Check that your hearing aids are set to the correct program (Roger / FM /
DAI / EXT / AUX)
Your Roger receivers are not
connected to Roger Pen iN
Hold Roger Pen iN close to each Roger receiver in turn and press the
Connect button
Your Roger Pen iN was part of a
network Press the Connect button on your Roger Pen iN
I keep losing the audio signal Distance between Roger Pen iN
and Roger receiver is too large Go closer to your Roger Pen iN
There are obstacles between you
and Roger Pen iN Make sure you can see the Roger Pen iN (line of sight)
The volume of my multimedia
device is too low Incorrect volume settings Increase volume of your audio source