SONOSAX SX62R
Quick Start Guide
Page 24 of 34
6.1.3
Track Naming
Naming a track on the hard disk or on the CF Card is done by pressing the [TRACK NAME] key - all keys
flashing - then by selecting the track number; a keyboard is displayed to type the name (max 8 characters ).
The name belongs to the track (not to the input channel) and is embedded in the metadata of the audio file.
Track names are displayed over the modulometer on the [TRACKS] monitoring screen; the name is replicated
over the modulometer of the corresponding input channel on the [INPUTS] monitoring screen, providing that
inputs are routed on a 1:1 configuration.
6.1.4
Example of a complete configuration
+ =
Tracks 5 & 6 are routed but not armed
Input channels 1, 2 & 3 assigned and mixed to track A on CF Card
1 x 1 assignment on the HD Tracks Input channels 4 assigned to track B on CF Card
6.1.5
Mirroring
When CF MIRROR function is enabled, the CF card replicates the same routing as set for the HD. The tracks
are recorded simultaneously on both drives providing that the performances of the CF card permits. The
modulometers of A & B tracks no longer appear in TRACKS modulometer's page.
When the Mirroring is disabled, tracks 1 to 8 are recorded on the Hard Disk, while A & B tracks are recorded
on the CF Card; A & B track's modulometers are displayed in the TRACKS modulometer's page.
NOTE:
Polyphonic file format implies that the Mirroring must be enabled, regardless if the CF Card is
present or not
