SONOSAX SX62R
Quick Start Guide
Page 15 of 34
4.4.4
Reference Tone Generator
A 650Hz Reference Tone Generator can be toggled On or Off in the [OUTPUTS] menu. Its level corresponds
to nominal reference level sets in the [SYSTEM SETUP]; thus it always posts "0" on the analogue scale of the
Peak-Metre", showing:
-18dBFS for a nominal output level of +6dBu
-20dBFS for a nominal output level of +4dBu
- 9dBFS for a nominal output level of +6dBu, if the SX62R is configured according to the EBU
recommendations (requires hardware modifications).
When turned On, the reference tone is sent to all the tracks of the recorder whose input channels are switched
on and to the master left and right, even if the master outputs are disabled (powered off)
NOTE:
a "double wave" symbol is posted on the main modulometer screen when the reference tone
is enabled.
