Sonoro VINYL, Руководство по эксплуатации

Страница: 30 / 36

4.7 Connect the 3 tone arm cables (right channel to input R, left channel to input L and
Ground to GND) to the corresponding sockets of the phono amplifier on the right
lower part of the device. After that connect the output of the phono amplifier
(output L/R) to a fitting high level input connection (f.i. AUX) of an audio playback
device or an audio amplifier. The switch on the phono amplifier has to be put to MM
as long as the with this device delivered MM cartridge Audiotechnica AT 95E is used.
4.8 Connect the phono amplifier with the 17V AC power plug and a mains socket. As
well connect the 24V AC/DC power plug with a mains socket and the motor on the
lower left side of the device.
Please make sure you do not mix up the two power plugs.
DC 24V
AC 17V
The standby switch is at the bottom of chassis.
30