Sonoro VINYL, Руководство по эксплуатации

Страница: 29 / 36

4.4 Unscrew the two transport screws of the motor. After that it freely lays on the 2
silicone washers and the red rubber ribbon. In case the motor tilts too much the belt
may shift from the guiding notch. In that case unscrew the four screws and tighten
the rubber ribbon. Afterwards fix the red ribbon with the screws to secure the
tension.
4.5 Put the platter on the inner platter and the platter mat a top the platter.
4.6 Align the two hinges of the dust cover and fix the dust cover onto them.
29