Sonoro SO-410, Руководство по эксплуатации

Страница: 18 / 252

18 © sonoro audio GmbH 2016
4.2 Connecting the power supply
1. Insert the connector of the power adapter into the DC power input
on the back of the device.
2. Insert the power plug into a wall socket.
The device is turned on.
4.3 Inserting the battery in the remote control
1. Open the battery compartment cover on the back of the remote
control by turning it anticlockwise using a small coin.
3. Replace and close the battery compartment cover by turning the
cover clockwise using a small coin.
i
Do not block the infra-red sensor on the device and the infra-red
transmitter on the remote control during use.
4.4 Using the antennas
1. Detach the FM/DAB antenna from the catch on the back of the
device.
2. Lift both FM/DAB antenna and Wi-Fi antenna upwards.
3. Extend the FM/DAB antenna for better reception.
4.5 Performing initial setup
When the device is powered on for the first time, the “Setup wizard”
appears on the display. Follow the instructions below to configure some
basic settings.
1. When the “Setup wizard” is displayed, press or on the remote
OK to start the setup.