Quick Start Guide for HARMONi G3
2.
Double-click the Mac OS Install icon. In the
Select Destination
window, click
the Options button and click the Perform Clean Installation check box that
appears in the subsequent screen. Click the Select button. Proceed through
the next several screens until you reach the
Install Software
window. Click
OK, Start, then Continue, and complete the installation. After the software is
installed, quit the Mac OS Install application. Follow the directions below
according to whether you installed Mac OS 9.0, 9.1, or 9.2 or later.
Mac OS 9.0 (or OS 8.6): Download/Install FireWire Driver Software
If Mac OS 8.6 through 9.0.4 is installed in your iMac, you must download and
install the appropriate FireWire driver software.
1.
Turn on your computer.
2.
Log on to the Internet and type in www.sonnettech.com/support/harmoni.
3. Locate and click on the link for HARMONi FireWire drivers.
4.
Read the information on the page, then click on the appropriate link to
download the driver.
5.
Install the driver, then restart the computer.
6.
Your installation is complete.
Mac OS 9.1: Install FireWire Driver Software From Mac OS CD
This section covers the installation of the necessary FireWire driver into your sys-
tem using the Mac OS 9.1 CD. Complete these steps only if you installed Mac OS
9.1 before installing the HARMONi upgrade.
If you installed Mac OS 9.1 after
installing the HARMONi upgrade, your installation is complete
.
1.
Start up your computer from the Mac OS 9.1 CD and double-click the
Mac OS Install application. In the
Select Destination
window, click the Select
button. Proceed through the next several screens until you reach the
Install
Software
window. Click the Customize button. In the
Custom Installation and
Removal
window, deselect all the Software component check boxes (click on
each check or dash until the box is empty), except Mac OS 9.1. Click the
pop-up menu to the right of Mac OS 9.1. Change from “Recommended
Installation” to “Customized Installation.” The
Select Mac OS 9.1 Features to
Install
window will appear shortly.
2.
Change “Recommended Installation” to “Customized Installation” from the
pop-up menu. deselect all the feature check boxes except “Network and
Connectivity.” Click the arrow next to “Network and Connectivity” to view
the features. Deselect all the features except “FireWire.” Click OK, Start, then
Continue to complete the installation. After the software is installed, quit the
Mac OS Install application and restart your computer from the hard drive
where Mac OS 9.1 is installed.
3.
Your installation is complete.
Mac OS 9.2 or later
Your installation is complete. The appropriate FireWire driver software is already
installed in your iMac.
11
