EN
46
46
• The device must be placed at a distance of at least 150 mm from all walls.
• Do not dispose of electrical equipment as unsorted waste, use separate collection facilities. Con-
tact the local municipality for information on collection systems. When electrical equipment is
disposed of in landfills, hazardous substances can enter the groundwater and thus the food chain.
Protect your health and well-being.
• Children must be supervised so they do not play with the equipment.
• When the heater is used for the first time, there may be a slight emission of smoke. This is quite
normal and will pass after a short time. The heating element is made of stainless steel and has
been coated with protective oil during manufacture. The smoke is caused by the residual oil when
it is heated.
• The housing is made of sheet steel and has been coated with heat-resistant powder.
• It is supplied complete with cable and plug.
• The device should not be placed lower than the socket.
• To avoid danger, a damaged connection cable may only be replaced by the manufacturer, its cus-
tomer service or a person qualified to do so.
• Do not use this heater if the unit has been dropped.
• Do not use if there are visible signs of damage to the heater.
• Use this heater on a horizontal and stable surface or mount it on the wall if necessary.
• WARNING:
Do not use this heater in small rooms if they are occupied by persons who cannot leave
the room alone, unless this is constantly monitored.
WARNING:
To reduce the risk of fire, keep
textiles, curtains or other combustible materials on material at least 1 m away from the heater.
The heater must not be located in front of an electrical outlet.
• This product has an overheat protection feature that turns off the heater. In the event of overhea-
ting, turn the heater off, unplug it from the wall outlet, and allow it to cool for 45 minutes. After
that, the heater can be turned on again. Before use, carefully make sure that the cause of overhea-
ting was not curtains, clothing, furniture, etc. covering the heater‘s vents.
• Avoid using an extension cord, as the extension cord may overheat and pose a fire hazard. Howe-
ver, if you must use an extension cord, the cable cross-section must be 1.5 mm².
03 - TECHNICAL DETAILS
Identification number
Description
SLIM E 1000
SLIM E 1500
SLIM E 2000
Units
Rated voltage
220–240 / 50-60 Hz
220–240 / 50-60 Hz
220–240 / 50-60 Hz
V/Hz
Rated current
4.4
6.6
8.7
A
Rated power
1000
1500
2000
W
Overall dimensions
500 x 400 x 85
640 x 400 x 85
940 x 400 x 85
mm
Weight
4.7
5.8
7.7
kg
Содержание SLIM E 1000
