Sonnen sonnenBatterie eco 9.43, Руководство по установке, Страница: 30 / 60

6 | Electrical installation
30 / 60 Installation instructions sonnenBatterie eco 9.43
6.3 Configuring the power meter
Tools:
• Touch display for power meter WM271
The power meter only provides correct measured values when the right measure-
ment mode is activated on the device. The
single-phase measurement mode is the
default setting. With a three-phase grid, then, the measurement mode must be
switched to three-phase measurement.
power meter
WM 271
Strommessung
Erzeugung Verbrauch
Current Measurement
Generation Consumption
Voltage Metering
Spannungsmessung
1
2
3
4
5
6
A1 A2
13 14 15 16
1
2
Illustration 26: Removing the front cover
„
Press the clips (2) on both sides of the
power meter. You might use a small
screwdriver.
„
Remove the front cover (1).
1
2
3
4
5
6
A1 A2
13 14 15 16
1
Illustration 27: Inserting the touch display
„
Insert the touch display (1) into the
power meter.
„
Supply the power meter with energy.
1
2
3
4
5
6
Illustration 28: Touch display
„
Press for 3 seconds.
The PASS ? screen appears.
1
2
3
4
5
6
Illustration 29: Password entry screen
„
Press for 3 seconds.
The CnGPASS screen appears. The power
meter is now in programming mode.
1
2
3
4
5
6
Illustration 30: CnGPASS screen
„
Press once.
The SYS screen appears.