27
If you experience any problems with your TV, check the list below and take
any necessary steps before calling for service. If none of the solutions help
you solve the problem, turn the power off and contact the after sales support
line for advice.
Before calling a service center, attempt the following steps to diagnose the
problem.
1. There is no power.
Ensure the power plug is securely inserted into the unit and wall outlet.
2. There is no picture or sound.
Try a different input source to check whether the source is at fault.
Check for mis-connection of cables or for wrong input source.
3. There are spots on the screen.
Your unit is being affected by interference from automobiles, trains,
high-voltage transmission lines, neon signs or another sources of
interference. Try redirecting or relocating your antenna to reduce the
affects of the interference.
4. Degraded colors or tints.
Check whether all the picture adjustments have been properly performed.
5. Improper Screen position or size.
Try selecting a different aspect ratio by pressing the <ASPECT> Button on
the remote control.
6. The image appears distorted.
Ensure the display aspect ratio is corredctly set to suit the program
source.
7. The image appears too bright,and there is a loss of definition in the
brightest areas of the image.
Reduce the contrast settings.
8. The image apperas too washed out, or the darkest areas of the image
appear too bright.
Reduce the brightness level till the black areas of the picture appear as
black.
9. Remote Control does not function properly.
Check for incorrect battery orientation.
Check for dead batteries.
Check your distance and angle from display.
Check whether remote control is pointing at sensor window;
Check for any obstacle between the Remote Control and Remote Control
sensor.
Check that the Remote Control sensor window is not under strong
fluorescent lighting.