10
2. PAIR YOUR MOBILE DEVICE WITH SONIQ DISPLAY
(1).Turn on the SONIQ Display by pressing the Power button on the side of
the TV or by pressing the Power button on the Remote Control.
(2).The TV can connect with wireless Wi-Fi network (use your phone/tablet
and follow below steps to connect) or wired network(use a RJ45 Ethernet
cable to connect). Make sure your phone or tablet is connected to the
same network you will use with your Chromecast built-in TV.
(3).Launch the Google Home app on your device. But first, tap “Accept” to
agree to the Terms of Service and Privacy Policy of Google Home.
NOTE:
For iOS devices, Google Home app will ask you to turn on
Bluetooth.
Highly recommended: Turn on Bluetooth to help improve the setup process.
You can swipe up from the bottom and turn on Bluetooth or tap SETTINGS
to turn on Bluetooth, then return to the Google Home app.
If you don't want to use Bluetooth for set up, use Wi-Fi hotspot to setup:
Tap your iPhone’s Home button > Go to your iOS Settings > WLAN
Connect to the Wi-Fi network that matches your Chromecast built-in
device. Look for something like CastTVXXXX.
Navigate back to the Google Home app. Your device should now be
detected. Tap CONTINUE.
(4).Hold your device close to the SONIQ TV and look for the code on the
bottom right corner of your TV. And tap “I SEE THE CODE” to continue.
Your Device
SONIQ Display
(5).Use the phone to select your region and name your SONIQ Display. And
tap “CONTINUE” to proceed. If guest mode is enabled, it will allow
compatible devices in the same room to cast without being on your Wi-Fi
network.
