![Sonifex Redbox RB-VHCMA4 Скачать руководство пользователя страница 74](http://html1.mh-extra.com/html/sonifex/redbox-rb-vhcma4/redbox-rb-vhcma4_user-handbook-manual_1321119074.webp)
62
Redbox Embedder/De-embedder User Handbook
SCI
7
S C I
Admin Connection
This displays any connection which has “Administrator” rights to the unit.
Network Status
This displays the current network settings assigned to the unit.
Settings
General
Front Panel Lock
When selected, this control disables the front panel and prohibits any changes to be made
via the front panel. This control is automatically disabled when the unit is powered on.
Channel Control
Enables/Disables the channel control mode.
Front Panel LED Brightness
Increases or decreases the LED intensity on the front panel.
Restore Defaults
Pressing this button will cause the unit to restore all settings to their factory defaults. All
previous settings will be lost.
Note:
The login details are not reset and are unaffected by
this process.
Fig 7-2: Network Settings
Network
Enable DHCP
This enables the unit to receive it’s IP address, subnet mask and gateway settings from a
DHCP server. If one is not available then this should be disabled through the serial port and
a valid static address be entered.
Note
: This setting cannot be changed while connected to the unit over Ethernet.
IP Address
: Displays the current IP address of the unit. If DHCP is enabled then this will
normally be the IP address supplied by the DHCP server.
Subnet Mask
: Displays the current subnet mask for the unit.