50
Redbox Embedder/De-embedder User Handbook
R B - V H C M D 1 6
RB-VHCMD
1
6
5
5
Digital 2 In Ground
Digital 6 In Ground
18
Digital 2 Out+
Digital 6 Out+
6
Digital 2 Out-
Digital 6 Out-
19
Digital 2 Out Ground
Digital 6 Out Ground
7
Digital 3 In+
Digital 7 In+
20
Digital 3 In-
Digital 7 In-
8
Digital 3 In Ground
Digital 7 In Ground
21
Digital 3 Out+
Digital 7 Out+
9
Digital 3 Out-
Digital 7 Out-
22
Digital 3 Out Ground
Digital 7 Out Ground
10
Digital 4 In+
Digital 8 In+
23
Digital 4 In-
Digital 8 In-
11
Digital 4 In Ground
Digital 8 In Ground
24
Digital 4 Out+
Digital 8 Out+
12
Digital 4 Out-
Digital 8 Out-
25
Digital 4 Out Ground
Digital 8 Out Ground
13
Do not connect
Do not connect
Control Modes
There are two modes available to control the embedding and de-embedding channel
routing process. These are the BANK mode and the CHANNEL mode.
Bank Mode
In Bank mode, audio is routed on a per bank basis, so when controlling embedding, a bank
of audio is selected to be embedded into a group and when de-embedding a group of
audio is selected to be sent to a bank.
Channel Mode
In Channel mode, audio is routed on a per channel basis, this allows for maximum flexibility
when embedding and de-embedding allowing any audio input channel to be embedded
to any channel within any group. And conversely, when de-embedding, any channel within
any group can be sent to any channel of any of the available audio output banks.
Changing Control Mode
To switch between Bank and Channel control modes, simultaneously press and hold
the GROUP CHANNEL and BANK CHANNEL buttons for 5 seconds. The mode will switch
after this time and the button can be released. Bank mode is in use when both the BANK