background image

v

Safety & Installation

Safety & Installation of Mains 

Operated Equipment

There are no user serviceable parts inside the equipment. If you should 
ever need to look inside the unit, always disconnect the mains supply 
before removing the equipment covers. The cover is connected to earth 
by means of the fixing screws. It is essential to maintain this earth/
ground connection to ensure a safe operating environment and provide 
electromagnetic shielding.

Voltage Setting Checks

Ensure that the machine operating voltage is correct for your mains power 
supply by checking the box in which your product was supplied. The voltage 
is shown on the box label. The available voltage settings are 115V, or 230V. 
Please note that all products are either switchable between 115V and 230V, 
or have a universal power supply.

Fuse Rating

The product is supplied with a single fuse in the live conducting path of the 
mains power input. For reasons of safety it is important that the correct 
rating and type of fuse is used. Incorrectly rated fuses could present a 
possible fire hazard, under equipment fault conditions. The active fuse is 
fitted on the outside rear panel of the unit.

Power Cable & Connection

An IEC power connector is supplied with the product which has a moulded 
plug attached – this is a legal requirement The mains lead is automatically 
configured for the country that the product is being sent to, from one of :

Territory

Voltage IEC Lead Type

Image

UK & Middle East

230V

UK 3 pin to IEC lead

Europe

230V

European Schuko round 2 pin to  
IEC lead

USA, Canada and 
South America

115V

3 flat pin to IEC lead 

Australia & New 
Zealand

230V

Australasian 3 flat pin to IEC lead

Connect the equipment in accordance with the connection details and 
before applying power to the unit, check that the machine has the correct 
operating voltage for your mains power supply.

Important Note: 

If there is an earth/ground terminal on the rear panel of 

the product then it must be earthed/grounded.

Содержание Redbox RB-AEC





























Отзывы: