8
DHY-03 User Handbook
INTR
ODUC
TION
Figure 1-7 : Conference Port Cable Connections.
The conference port cable simple cross-connects the Conference Input (Phase and Non-
Phase) signals to the Conference Output (Phase and Non-Phase) signals respectively. It is
available as an accessory, DHY-03CONF.
Using the Conference Port as a Record Output
If you are not using the conference port, it can be used to provide a balanced audio output
from the Conference Output Phase and Non-Phase pins. This output will contain just the
caller signal unless JP3 is fitted (see Figure 2-5), which will create a mix of caller and sender
on the record output.
Figure 1-6 : Audio Paths for Conference Call.
INTRODUCTION
1
