manualshive.com logo in svg

Sonifex DHY-03, Руководство пользователя


Поделиться
Скачать
background image

DHY-03 User Handbook

vii

WEEE & RoHS Directives - Sonifex Statement

The Waste Electrical and Electronic Equipment (WEEE) Directive was agreed on 
13 February 2003, along with the related Directive 2002/95/EC on Restrictions 
of the use of certain Hazardous Substances in electrical and electronic 
equipment (RoHS). 

The 

Waste Electrical and Electronic Equipment Directive

 

(WEEE)

 aims to minimise the 

impacts of electrical and electronic equipment on the environment during their life times 
and when they become waste. It applies to a huge spectrum of products. It encourages 
and sets criteria for the collection, treatment, recycling and recovery of waste electrical and 
electronic equipment. All products manufactured by Sonifex Ltd have the WEEE directive 
label placed on the case. It gives a contact for individuals who are unsure about the correct 
procedure when the product has reached its “end of use”. 

Sonifex Ltd will be happy to give you information about local organisations that can 
reprocess the products, or alternatively all products that have reached “end of use” can be 
returned to Sonifex and will be reprocessed correctly free of charge. 

Sonifex Ltd has phased out the use of certain hazardous substances identified in the 
European Union’s 

Restriction of Hazardous Substances (RoHS) 

directive. The RoHS directive 

limits the use of certain hazardous substances currently used in EEE manufacture, including 
lead, mercury, cadmium, hexavalent chromium, and halide-containing compounds PBB 
(polybrominated biphenyl) and PBDE (polybrominated diphenyl ether). Elimination of these 
substances will result in more environmentally friendly recycling of electronic equipment.  
For the products which Sonifex manufacture, the main area where products were affected 
was in the use of lead for manufacturing and assembling electronics circuit boards.

Sonifex Ltd practices lead-free (LF) manufacturing processes. LF solder is used on the 
surface-mount PCB manufacturing processes and for hand soldering. The printed circuit 
boards (PCBs) used are either gold plated, or immersion tin plated, both of which use no 
lead. Historically the PCBs were hot air solder levelled (HASL) PCBs which used tin/lead 
based solder. 

The manufacturing processes include the assembly of purchased components from various 
sources. Product is offered as RoHS compliant, or LF, only after sufficient evidence is received 
from the component manufacturers that their components are RoHS compliant. Sonifex 
Ltd relies solely on the distributor, or manufacturer, of the components for identification of 
RoHS compliance.  Thus whilst every effort is made to ensure compliance, Sonifex Ltd makes 
no warranty, or certification, or declaration of compliance concerning said components.

Sonifex Ltd defines “Lead Free” as pertaining to any product, which has been manufactured 
by Sonifex Ltd using components which have been declared by the manufacturers as 
“Lead Free”. All statements by Sonifex Ltd of RoHS compliance are based on component 
manufacturer documentation.

SAFE

T

Y INFORM

A

TION

SAFETY INFORMATION

Содержание DHY-03

























































Отзывы:

Нет отзывов

Похожие инструкции для DHY-03

Uniden TCX905 - Cordless Extension Handset Manuel Du Propriétaire preview
TCX905 - Cordless Extension Handset
Бренд: Uniden Страницы: 28
Uniden TCX905 - Cordless Extension Handset Owner'S Manual preview
TCX905 - Cordless Extension Handset
Бренд: Uniden Страницы: 28
Uniden EXT 1965 Owner'S Manual preview
EXT 1965
Бренд: Uniden Страницы: 49
Uniden EXT 1960 Mode D'Emploi preview
EXT 1960
Бренд: Uniden Страницы: 46
Uniden EXT 1865 Owner'S Manual preview
EXT 1865
Бренд: Uniden Страницы: 48
Uniden TRU 8865 Series Manual D'Utilisation preview
TRU 8865 Series
Бренд: Uniden Страницы: 84
Uniden TRU 246 Owner'S Manual preview
TRU 246
Бренд: Uniden Страницы: 48
Karel NT421 Technical Reference And User'S Manual preview
NT421
Бренд: Karel Страницы: 24
Uniden FP203 Owner'S Manual preview
FP203
Бренд: Uniden Страницы: 12
Corinex Internet Phone with Headset Manual preview
Internet Phone with Headset
Бренд: Corinex Страницы: 41
3SIXT SNAP STICK User Manual preview
SNAP STICK
Бренд: 3SIXT Страницы: 6
Serene HD-60J Operating Manual preview
HD-60J
Бренд: Serene Страницы: 30
Grandstream Networks Budge tone 100 User Manual preview
Budge tone 100
Бренд: Grandstream Networks Страницы: 7
Unify Gigaset M2 plus professional Service Manual preview
Gigaset M2 plus professional
Бренд: Unify Страницы: 61
Uniden 1360 User Manual preview
1360
Бренд: Uniden Страницы: 1
InfinitePlay ipdoor Flush Quick Start Manual preview
ipdoor Flush
Бренд: InfinitePlay Страницы: 25
NEC DTerm Series 80 User Manual preview
DTerm Series 80
Бренд: NEC Страницы: 2
Zte WP651 User Manual preview
WP651
Бренд: Zte Страницы: 19

Бренды по названию

Популярные бренды

Загрузить еще бренды