How to operate SONIX
In Manual Mode
In Program Mode
Press Power Button to turn on the product (initial
settings: frequency to 3Hz, intensity to "0", and time
to "1" minute).
Press Time Button to set the time(increment by 1 min
per press, up to 10 minutes).
Press Start Button.
Adjust INTENSITY(0-99, increment by 10) and
FREQUENCY(3-70Hz) to your choice.
Press Stop Button to stop operation Step down from
the plate after it stops completely.
Press Power Button to stop operation and change
into standby.
Press Mode Button to select the program you want.
Press Intensity Button to adjust intensity.
Time is set to 10 minutes(You can't change intensity
and frequency during operation).
Press Start Button.
Press Stop Button to stop operation Step down from
the plate after it stops completely.
Press Power Button to stop operation and change
into standby.
19
18
Disassembly procedure is in the reverse order
of the assembly procedure.
Power cable must be removed in advance
prior to disassembly.
Proceed the disassembly following
the assembly sequence in reverse order
from #5 to #1.
Push "POWER" botton on control panel.
After push "START" button, push "INTENSITY" and
"FREQUENCY" button for setting your level.
Confirm the machine is operating properly.
Assembly
Disassembly
6
How to Operate SONIX
1
2
3
1
2
3
5
5
6
7
8
9
5
6
7
8
9
10
10
Содержание SONIX SW-VC15
Страница 2: ...Integrated Sonic Wave System...
