SonicWALL SSL-VPN 4000, Руководство по началу работы, Страница: 14 / 62

SonicWALL SSL-VPN 4000 Getting Started Guide Page 13
4. Enter your subnet mask in the Subnet Mask field.
5. Click the Add button to add this client route.
Setting your NetExtender Address Range
The NetExtender IP range defines the IP address pool from which addresses will be
assigned to remote users during NetExtender sessions. The range needs to be large
enough to accommodate the maximum number of concurrent NetExtender users you
wish to support plus one (such as 15 users will require 16 addresses like
192.168.200.100 to 192.168.200.115). The range should fall within the same subnet as
the interface to which the SonicWALL SSL-VPN appliance is connected, and in cases
where there are other hosts on the same segment as the SonicWALL SSL-VPN
appliance, it must not overlap or collide with any assigned addresses. You can determine
the correct subnet based on your network scenario selection:
Scenario A Use the default NetExtender range:
192.168.200.100 to 192.168.200.200
Scenario B Select a range that falls within your existing DMZ subnet. For
example, if your DMZ uses the
192.168.50.0/24 subnet, and
you want to support up to 30 concurrent NetExtender sessions,
you could use
192.168.50.220 to 192.168.50.250 , providing
they are not already in use.
Scenario C Select a range that falls within your existing LAN subnet. For
example, if your LAN uses the
192.168.168.0/24 subnet, and
you want to support up to 10 concurrent NetExtender sessions,
you could use
192.168.168.240 to 192.168.168.250 , providing
they are not already in use.