SonicWALL CDP 6080, Руководство по началу работы

Страница: 21 / 60

Page 18 Configuring Appliance Settings
3. In the server field, type in the IP address of the DNS
server used in your local network. You can look at the DNS
settings on your gateway appliance to determine this.
4. Click Save .
Configuring a Static IP Address for the Appliance
This procedure describes how to configure your SonicWALL
CDP appliance with a static IP address. After changing the IP
address of your appliance, you must point your browser to the
new IP address to access the Web management interface.
For your records, enter the chosen IP address for your
SonicWALL CDP appliance in the space provided below.
1. In the Web management interface, click Network in the
navigation pane, and then click Settings .
2. On the Interfaces tab, click the Configure icon for the eth0
interface.
3. In the ip field, enter an unused static IP address that is
within the range of your local subnet.
For example, if the LAN IP address of your gateway firewall
is 10.215.10.1 and the subnet mask is 255.255.255.0, you
could set the static IP address on your SonicWALL CDP
appliance to 10.215.10.61.
4. In the netmask field, enter your subnet mask.
5. In the gateway field, enter the IP address of the default
gateway (usually a firewall) for your local network.
SonicWALL CDP IP
address
:
See
Networking
Information - page 7
______.______.______.______