background image

Additional Usage Notes 

1.

 

In normal use only the control button for adjusting the headphone level will need to be used. The 
other buttons on the Evo 4 should not be pressed. For example, the “48V” button in the upper left 
corner should always be on (illuminated red). Pressing the control buttons may result in the 
settings being incorrect. See “Resetting All Controls” below for fixing this problem. 

2.

 

If you have trouble hearing the teleconference participants, you may need to adjust the 
monitoring balance. This allows you to have a comfortable level for hearing the participants and 
yourself. This adjustment also controls the volume in the headphones when using the computer to 

play audio to the teleconference participants. Press the monitor button 

 in the lower right 

corner of the Evo 4. Turning the volume knob counter clockwise will increase the volume of your 
microphone (and the playback audio from the computer). Turn the volume knob clockwise to 
increase the proportion of sound from the teleconference participants. Normally setting the 
monitor level to the middle (12 O’clock position) will give a good balance of the signals. 

3.

 

If the participants in the teleconference have trouble hearing you because the volume is too low or 

too high, the microphone level can be adjusted by pressing #1 microphone button 

 and then 

turn the large knob to get the proper volume. After adjusting the microphone level, you should 
press the headphone level button again (to avoid accidently changing the microphone level).  

4.

 

The supplied single-earpiece headphone can be replaced with any type of headphone that you 
prefer for listening to the teleconference, using the included ¼” to 3.5mm headphone adapter.  

 

Resetting All Controls 

If for some reason any of the required Evo 4 settings are accidentally changed, the default settings can be 
restored with the following steps: 

 

Left click on in the “Windows System Tray”. This is the little up arrow icon in the lower right corner of 
the computer screen: 

 

 

Then right click on the Evo control icon: 

Содержание Evo 4



















Отзывы: