Soniclear Evo 4, Руководство по эксплуатации

Страница: 4 / 18

Evo 4 Operation
Overview
The Evo 4 Loopback Kit is designed to make it easy to record computer-based teleconferences in
SoniClear with high audio quality. It will work with any conferencing software, such as Zoom, WebEx,
or Teams. It also works with softphone programs, such as 8x8 Work, Vonage, Ring Central, and Avaya.
The Evo 4 must be installed correctly before use. See the section below, “Evo 4 Loopback Kit
Installation”. After installation, the Evo 4 interface will turn on automatically when the computer is
started, making it immediately ready for teleconferencing and for recording in SoniClear.
Using Microphone and Headphone
The kit includes a microphone, a monitor headphone, and the black Evo 4 interface control box for
connecting the microphone and headphone to the computer.
Place the microphone so that it is close to where you are sitting without being in the way of your work.
The microphone has a very directional pickup pattern, so it does not need to be right in front of your
mouth. You will be heard clearly without needing to lean in to the microphone.
All of the features of the Evo 4 are adjusted using the buttons and single large knob on the top of the
control box:
You will normally only need to use the volume knob to adjust the playback level on the headphones.
When starting your conference, press the headphone level button in the lower right corner. Then turn
the large knob to get the desired listening level.