Soniclear Evo 4, Руководство по эксплуатации

Страница: 13 / 18

SoniClear Software Configuration for Evo 4
The SoniClear software must be manually set to the correct configuration to work with the Evo 4
interface. To do this, start SoniClear and select Edit/Preferences from the pulldown menu.
Recording Options Tab - Sound Quality
In the Recording Options preferences tab, set the recording format. For Meeting Recorder 9
select Meeting (Stereo WAV). For All other SoniClear products, select Multichannel (MP3) and
set the channels selector to 2 channels.
Hardware Tab – Audio Device Selection
Select the Hardware tab and modify the settings according to the following instructions.
Recording Device Setup
The Recording Device Selection side of the Hardware tab controls the usage of the sound cards
in the computer during recording.
Default Recording Device
This is the sound card input for recording. It should be set to “Loopback 1/2 (Audient EVO4)”.
Note that the name may have an additional number in front of the word Audient, such as
“Loopback 1/2 (2- Audient EVO4)”. This indicates that the Evo 4 interface has been plugged
into more than one USB jack on the computer at some point in time.
Once the Default Recording Device field has been set, the Evo 4 must be plugged into the same
USB jack on the computer each time it is used.
Removable Recording Device
The automatic selection of a removable audio device is not used for this configuration. The “Use
Removable Device If Present” and “Automatically Set Removable Device ” check boxes should
be unchecked.
Advanced Recording Options
These options control how recording is processed.