SONIC-POTIONS Erica Synths LXR-02, Руководство пользователя

Страница: 34 / 44

8.8. VELOCITY MODULATION
The note on velocity can be used as a modulation source and is an important tool
to bring some life to your static patches. The velocity can modulate 2 destinations
> The velocity can modulate the voice volume.
> Additionally it can modulate any parameter of the voice.
Especially when using external MIDI gear like keyboards or drum pads the velocity
modulation is quite fun. If you don't use external input devices and are only using
the internal sequencer, the velocity for each step can be set in the STEP
PARAMETER MENU.
Did you know?
By default the velocity is modulating the voice volume. This hard wired
connection can be turned off in the modulation menu with the 'Vol'
on/off parameter.
By deactivating the volume modulation you can use the velocity
modulation as a 3rd automation track.
8.9. OUTPUT ROUTING
Each voice can be freely routed to the 4 different output jacks. They act either as
4 individual mono outs (the pan parameter has no effect) or as 2 pairs of stereo
outputs. There is an additional FX bus available as a routing target as well. Have a
look at the FX section of the manual for more info.
Did you know?
The synth detects if a cable is inserted into the jack. If you have a
patch where a voice is routed to an unconnected output, it will be
played on the nearest connected output instead.
The synthesizer has 2 MIDI interfaces. A standard serial interface using DIN connectors,
as well as a MIDI USB interface to be used with a computer. Both interfaces provide an
I/O pair.
9.1. MIDI CHANNEL
You can set a global MIDI channel and a per-voice MIDI channel for different use cases.
9.2. MIDI ROUTING (MIDI SOFT THRU)
You can route MIDI messages from input to output. This is set in the global menu under
"mrt". There are 6 possible values:
> off - no routing.
> U2M - USB MIDI is routed to the MIDI OUT port.
> M2M - MIDI received from the MIDI IN port is routed to the MIDI OUT port.
> A2M - both USB and MIDI are routed to the MIDI OUT port.
> M2U - the MIDI input port is routed to the USB output port.
> M2A - MIDI received from the MIDI IN port is routed to both the MIDI output and the
USB output.
9.3. MIDI FILTERING
You can filter messages from being transmitted or received. Transmit(Tx) is independent
of receive(Rx). There are four categories of messages that can be individually configured:
> Program Change (P)
> Control Change (C)
> Realtime start/stop/clock (R)
> Note on/off (N).
MIDI
9
LXR OWNERS MANUAL 34